home *** CD-ROM | disk | FTP | other *** search
- Path: newshub.cts.com!usenet
- From: pwright@crash.cts.com (Phil Wright)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Iomega zip 100 drive
- Date: 29 Feb 1996 19:34:06 GMT
- Organization: CTS Network Services
- Message-ID: <592.6633T622T321@crash.cts.com>
- References: <Pine.ULT.3.91.960222145846.28775A-100000@media-lab.media.mit.edu>
- <9602262243.0VXMY01@sstar.com> <1373.6632T794T1343@xmission.com>
- <4h2kda$fug@fcnews.fc.hp.com> <Pine.BSD/.3.91.960228210759.23068B-100000@ecf2.puc.edu>
- NNTP-Posting-Host: gargoyle.cts.com
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP)
-
- On 29-Feb-96 10:11:27, :=Rob=: was reported to have said:
- >> Sure they do! My Zip handles diskchanges just like a floppy drive.
- >> But, your SCSI controller must also support it. I know that the 3000,
-
- >How would one go about determining if disk changes are supported,
- >and how do you enable it or whatever?
-
- Either it does or it doesn't. Assuming you can put a proper RDB on the
- Zip disks and boot with a disk in the drive, anytime you swap disks, the
- new disk should be recognized. All of your Zip disks should have the same
- RDB if you want this to work.
-
- Phil
-
- pwright@crash.cts.com
-
-